BD Valve Body Installation Manual for Dodge Ram 2000-2004
BD Valve Body Installation Manual for Dodge Ram 2000-2004
1. Pressure testing is accomplished by inserting a fitting and hose assembly with a good quality gauge into the center 1/8” port on the passenger side of the transmission. Leave the gauge attached for testing later. 2. VERY IMPORTANT – Road test with gauge in place and record pressures and shift point RPM’s BEFORE modifications are carried out to determine the condition of the transmission prior to installing this valve body. Pressure will only be indicated with transmission in Drive position.
If you enjoyed this post, make sure you subscribe to the feed and get future manuals delivered to your email!
