Body Lift Installation Instructions Jeep Wrangler
Body Lift Installation Instructions Jeep Wrangler
Only install this kit on the vehicle for which it is intended. If anytime during the installation you encounter something different from what is outlined in the instructions, call technical support at (928) 636-3176. Park vehicle on a clean, dry, flat, level surface and block the tires so vehicle cannot roll in either direction. Disconnect both battery cables. Disconnect the negative cable (1) first, then the positive cable (2) from the battery (3).
Remove airbag fuse (7) from fuse panel (8). See owners manual for fuse location. Remove six radiator mounting bolts (24) and radiator (22) from core support (15). Let fan shroud and radiator rest against fan. Automatic transmission models come equipped with a cable shifting mechanism.
If you enjoyed this post, make sure you subscribe to the feed and get future manuals delivered to your email!
