BOSE Stereo Removal and Installation Instructions Nissan 350Z 2003
BOSE Stereo Removal and Installation Instructions Nissan 350Z 2003
By firmly grabbing the gear shift trim ring with your fingers, gently pull up on the back edge of trim panel. This will release the front edge from above the panel. Slowly pull this control panel away from the dash console. Remove two outside screws from the exposed cavity securing the bottom of BOSE stereo mounting bracket. During removal, loosening the ‘white box’ below the car stereo with white ribbon cable, – it is necessary to move this slightly before the final HU removal process.
Remove the rubber mat from the bottom of the Navigation cubby hole. Remove the two screws (shown) that hold the Navigation Hatch door closed. Remove the six (6) screws circled here. Note: The innermost screws hold the white plastic box in. We need to remove these screws to loosen that white box.
If you enjoyed this post, make sure you subscribe to the feed and get future manuals delivered to your email!
