Car Stereo Installation Guide Nissan 240SX
Car Stereo Installation Guide Nissan 240SX
This system used a Kenwood KDC-1011S AM/FM/CD head unit and Boston Acoustics 2-way 4×6 and 6.5 in. speakers. It was retrofitted into a 1991 Nissan 240SX with a factory premium sound package, replacing the AM/FM/Cassette head unit and dual-cone speakers. I applaud the Nissan designers for making it so easy to install a head unit into the dash. The plastic dash piece that surrounds the stereo, A/C, and shifter is retained with four spring clips; just lift it off.
The stereo is secured into the dash by a bracket and four mounting screws. Wire Color and function. LIGHT GREEN ->AMPLIFIER POWER This is an output from the unit. When turned on, the unit should apply +12V power to this signal. If you have the Nissan premium sound package, its amplifiers use this signal to control their on/off state. Connect this to the ANTENNA POWER output on the new unit. BLACK W/RED STRIPE -> ANTENNA POWER, This is an output from the unit. When turned on, the unit should apply +12V power to this signal. The power antenna uses this signal to control its up/down state.
