Free Clutch Overhaul Guide For Mitsubishi Eclipse
Free Clutch Overhaul Guide For Mitsubishi Eclipse
Removal service point : Move the release fork in the direction shown to remove the clip from the fulcrum. Installation service point 1. Apply Mitsubishi genuine grease part number 0101011 or equivalent to the illustrated positions of the release fork. 2. Install the release fork to the fulcrum.
Clutch disk and clutch cover installation 1. Apply Mitsubishi genuine grease part number 0101011 or equivalent to the clutch disc splines and rub it in the splines with a brush. 2. Using the clutch disc guide to position the clutch disc on the flywheel. 3. Install the clutch cover onto the flywheel. Outer race installation : Press in the bushing into the release fork to the position shown in the illustration. Release fork installation : Apply Mitsubishi genuine grease part number 0101011 or equivalent to the illustrated positions of the release fork. Sealing cap installation : Press in the sealing cap to the position shown in the illustration. Be sure that it is not installed in a slanted position. Clutch inspection : 1. Check the diaphragm spring end for wear and uneven height. Replace if wear is evident or height difference exceeds the limit. Limit: 0.5 mm (0.020 inch) 2. Check the pressure plate surface for wear, cracks and discoloration. 3. Check the rivets of the strap plate for looseness.
If you enjoyed this post, make sure you subscribe to the feed and get future manuals delivered to your email!
