Heater Core Replacement Guide Ford F 150 4.6 97 Expedition 1997
Heater Core Replacement Guide Ford F 150 4.6 97 Expedition 1997
I was surprised at the helping hand the dealer mechs were. Leave all the steering column and large bulkhead elect plugs attached, I unhooked these before the Ford mechanic advised me not to mess with them. On vehicles equipped with automatic transmissions, move the shift lever to the 1 position to ease removal of the steering column top opening cover. ALWAYS A Good idea to put wood blocks at the rear wheels so you don’t roll away! Carefully pry to release the (A) four clips and remove the (B) steering column (TOP) opening cover.
Remove the lower instrument panel steering column cover, Remove the bulkhead wiring harness from inside the engine compartment. OPTIONAL!! 1 Loosen the three bulkhead wiring harness electrical connector bolts. Disconnect the three bulkhead electrical connectors.
If you enjoyed this post, make sure you subscribe to the feed and get future manuals delivered to your email!
