Installation Instruction Manual Nissan Rogue 2008
Installation Instruction Manual Nissan Rogue 2008
Unplug and remove the speaker. (Figure B). Unclip the panel above the radio including the a/c vents, then unplug hazard switch and remove. (Figure C). Unclip the panel below the radio including the climate controls. Unplug climate controls and remove the panel. (Figure D) Slide the DIN cage into the Radio Housing and secure by bending the metal locking tabs outward.
(Figure A) Slide the aftermarket radio into the cage until it snaps into place. (Figure B). Mount the ISO Brackets to the radio with the screws supplied with the radio. (Figure A). Locate the factory wiring harness in the dash. Metra recommends using the proper mating adapter and making connections as shown.
If you enjoyed this post, make sure you subscribe to the feed and get future manuals delivered to your email!
