Intercooled Supercharger System Installation Manual for 2005-2007 Ford Mustang 4.6L 3V
Intercooled Supercharger System Installation Manual for 2005-2007 Ford Mustang 4.6L 3V
Ensure vehicle has 91 or higher-octane fuel in it prior to supercharger installation! Disconnect the negative (-) battery clamp using a 7mm wrench. Remove the Positive Crankcase Ventilation (PCV) line from the air tube by pressing the release trigger in the connector and pulling it free. Follow the line to its connection on the cam cover and remove the line completely from the motor.
Remove the Electronic Throttle Control (ETC) connector by sliding the red release latch outward and pulling the connector free. Lift the alternator up off its mounting studs and carefully place it on the passenger side fender well. Protect the fender wall using a thick shop towel or fender cover.
If you enjoyed this post, make sure you subscribe to the feed and get future manuals delivered to your email!
