Signal Mirror Installation Instruction for Dodge
Signal Mirror Installation Instruction for Dodge
1) Unplug the connections for the mirror, door lock, and window control wires. 2) Remove door panel. 3) While securing mirror with one hand, and being sure not to drop components into the door, remove 3 nuts holding mirror to door. 4) Remove mirror from door. Procedure B2 – Mirror Housing Removal: Ram Van 1) Remove window/lock/mirror control module. 2) Pry around the bottom of the door panel with a small pry bar or door panel removal tool in order to unsnap and remove door panel.
Place mirror housing on a clean level surface. Push on the outer edge of the mirror to manually pivot it fully outward so a small pry bar can be inserted under its inner edge. Apply pressure with the pry bar until the mirror backing plate begins to unsnap from the motor.
If you enjoyed this post, make sure you subscribe to the feed and get future manuals delivered to your email!
