Step by Step Trans-Brake Installation Guide Ford C-4
Step by Step Trans-Brake Installation Guide Ford C-4
The transmission must be properly rebuilt for racing before installation of this Trans-Brake. See attached diagram for the necessary modification. It is necessary for two ¼” vent holes to be drilled behind the servo in the case as shown. Remove and inspect the Forward drum, making sure to maintain a minimum clutch pack clearance of .025 – .040.
Remove and discard stock modulator, modulator valve, and governor assembly. Install Trans-Brake valve and spring in stock modulator valve bore, making sure the valve operates freely. Install the new Trans-Brake valve body in the case using your manual valve, make sure it is properly positioned with shift lever.
If you enjoyed this post, make sure you subscribe to the feed and get future manuals delivered to your email!
