Tubular Exhaust System Installation Instruction Toyota Tacoma 1995-1998
Tubular Exhaust System Installation Instruction Toyota Tacoma 1995-1998
This Edelbrock Tubular Exhaust System has received an Executive Order number (E.O.#) from the California Air Resources Board (C.A.R.B.) making it legal for street use in all 50 states. To assist you with emission equipment certification, we have included a silver fan shroud decal to help testing personnel verify the this part is a legal replacement on the vehicle for which it is cataloged. The adhesive-backed decal should be affixed next to the existing emission and engine specifications decal.
Do not cover any part of your original emission decal. Disassembly 1. Disconnect negative battery cable. 2. Remove O2 sensor in front of catalytic converter. Be careful not to damage. 3. Remove extension pipe. This is the pipe between catalytic converter and crossover pipe. This may require cutting of pipe. (See “Cutting Instructions”). 4. Unbolt the EGR tube (if equipped), from left manifold. 5. Remove insulation from firewall behind crossover pipe. Installation of T.E.S. will be easier if you remove the splined steering shaft from steering coupler located on steering box.
If you enjoyed this post, make sure you subscribe to the feed and get future manuals delivered to your email!
